Can you test emergency light by by yourself?

In the vast majority of Australian buildings, the circuit that supplies the regular lighting is also used for the wiring of the emergency light. When the regular lights in the room go out, it is imperative that you have the emergency lights turned on. In the best-case scenario, they will be linked to a test key switch just like these.

Who can inspect the emergency lights?

Anyone. Someone accountable will be given the responsibility of ensuring that the emergency lights are functioning appropriately at all times. The outcomes of the tests are going to be entered into the logbook by that individual.

This responsible individual is the one who should carry out the test; nevertheless, they do not need to have any specific understanding regarding electrical wiring systems. In the event that they identify a problem, it will be necessary for them to confirm that the issue is resolved and then retest the system. However, it’s better to call local electrician if you want to avoid risks.

How to test emergency lights?

• If you turn off the electricity to the lights and then insert the key, the lights should switch on automatically.
• Set  a timer .
• Examine the areas that are now being lighted by these lights on foot to ensure that they are functioning appropriately.
• Turn the power back on to the system by toggling the switch once again after the period of time that you want to test (whether it be functional, 10 minutes, or 3 hours).
• Repeat the previous step of checking the emergency lights to ensure that the charge indicator is on.
• Make sure to note the outcomes in your logbook.

When in the day should I perform a test of the emergency lights?

Testing your emergency lights at the right time is just as critical as testing them at the right time. The emergency lights are there for a reason; but, for the next 24 hours after a test that lasts for three hours, you may have a decreased system that is unable to supply enough light for three hours in an emergency.

You will begin a test that will last for three hours at nine in the morning, and then at twelve in the afternoon, the lights will begin charging once more. If there is a power outage at 12:30 p.m., the emergency lights won’t work for very long, so you might run into some issues.

If everyone leaves for the day at five o’clock, then you should probably begin the test at that time, or up to three hours earlier. You are aware that if there was a problem after the test, no one would be in the building, and the emergency lights would have a lot of time to recharge overnight before people started working again in the morning.

Also read:

Why you should use LED light ?

Should I check ALL of the emergency lights at the same time?

Both yes and no can apply. If it is a tiny structure and all of the emergency lights are connected to the same circuit, then you do not have a choice since you will be trapped.

However, if it is a large facility, then it makes sense to space out the testing over multiple days. Because of this, even if there was a power outage during the recharging period, the entire building would not be harmed.